Tel: +86-371-86151827

cold rolled ss 316 l stainless steel plate high strength

Steel grade:cold rolled ss 316 l stainless steel plate high strength

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

cold rolled ss 316 l stainless steel plate high strength Introduction

Cold Rolled Ss 316 L Stainless Steel Plate high Strength

North American Stainless - An Olympic Steel Company316 SS offers good strength and creep resistance andalso possesses excellent mechanical ... Product is available in Cold Rolled, Continuous Mill Plate and Plate Mill Plate form up to ... steel, unless North American Stainless specifically authorizes the purpose or selection.

316L cold rolled stainless steel coil - hmmetalmaterial

316L cold rolled stainless steel coil. About 316L material: 316L stainless steel commonly used in the pulp and paper equipment heat exchangers, dyeing equipment, film processing equipment, pipelines, coastal areas outside the building materials, as well as senior watch bracelet, case and so on.

Stainless Steel 316 Plate, SS 316L Plates Supplier in ...

Panchdeep metal is one of the leading stockist and supplier of Stainless Steel 316 / 316L Plates, 316 SS Plates, ASTM A240 Stainless Steel 316L Plate, TP 316 / 316L SS Plates in Mumbai, India.

STAINLESS STEEL PLATES 304, 316L - simplexmetal.net

Manufacturer of STAINLESS STEEL PLATES 304, 316L - Duplex Steel S32760 (EN 1.4501) / 2205 / 31803 Plates, Stainless Steel Hot Rolled 904L (UNS N08904) Plates Sheets, Cold Rolled SS Sheets 304 / 316 / 310 / 202 / J4 / 430 / 410 and Bright Annealed Steel Strip / Bright Cold Rolled Steel Strip offered by Simplex Metal & Alloys, Mumbai, Maharashtra.

316L hot rolled stainless steel plate - hmmetalmaterial

316L hot rolled stainelss steel plate. About 316L material: 316L stainless steel commonly used in the pulp and paper equipment heat exchangers, dyeing equipment, film processing equipment, pipelines, coastal areas outside the building materials, as well as senior watch bracelet, case and so on.[PDF]

Stainless Steel Grade Datasheets

Stainless Steel Datasheets Revised November 2011 Page 1 of 1 atlassteels.au Austenitic Stainless Steels 301, 301L, 301LN High strength for roll formed structural components 302HQ Low work hardening rate grade for cold heading fasteners 303, 303Se Free-machining bar grades 304, 304L, 304H Standard 18/8 grades 310, 310S, 310H High temperature resistant grades

High Strength Stainless Steel Sheet 316 316l Wholesale ...

Alibaba offers 738 high strength stainless steel sheet 316 316l products. About 48% of these are steel sheets, 31% are stainless steel sheets. A wide variety of high strength stainless steel sheet 316 316l options are available to you, such as aisi, astm, and jis.[PDF]

North American Stainless

North American Stainless . Flat Product Stainless Steel Grade Sheet . 316 (S31600)/EN 1.4401 . 316L (S31603)/ EN 1.4404 . ... Product is available in Cold Rolled, Continuous Mill Plate and Plate Mill Plate form up to ... The properties quoted below are typical of annealed 316 only, as strength values for 316L

Alloy 316/316L Austenitic Stainless Steel Plate ...

Sandmeyer Steel Company stocks the largest single-site stainless steel plate inventory in North America with thicknesses from 3/16" through 6-1/2" in 1/8" increments. Alloy 316/316L stainless steel plate is also available as E-Z Drill for improved machinability. Available thicknesses for Alloy 316/316L:

Experienced supplier of 316L stainless steel plate,316 ...

With wide experience and expertise, Bozhong Group is one of the leading 316/316l/316ti/316L stainless steel sheet/plate manufacturers and suppliers. We have hundreds of high-qualified workers at your service. Please rest assured to get the competitive price 316/316l/316ti stainless steel sheet/plate for …

Type 316/316L Stainless Steels Explained - The Balance

Marine grade stainless steel, called type 316, is resistant to certain types of interactions. There is a variety of different types of 316 stainless steels, including 316 L, F, N, H, and several others. Each is slightly different, and each is used for different purposes. The "L" designation means 316L steel has less carbon than 316 steel.

316 and 316L Stainless Steel Sheet, Coil & Bar - AMS 5524 ...

316 / 316L are austenitic stainless steels that contain molybdenum, which increases their resistance to many chemical corrodents and marine environments. 316L is an extra low carbon version of 316 stainless steel. These materials are more resistant to general corrosion and pitting/crevices than conventional austenitic stainless steels.

316 / 316L Stainless Steel Plate | O'Neal Steel

onealsteel› Stainless Steel› Plate316 / 316L Plate Characteristics. 316 / 316L stainless steel plate provides more effective corrosion and pitting protection than 304 stainless steel due to increased levels of molybdenum and nickel in the alloy. It exhibits the same high strength, toughness, high temperature and high workability as 304 stainless alloy plate. Applications

Cold Rolled 316 Plate Stainless Steel For Wholesale

Hot Rolled/cold Roll Stainless Steel Sheet /plate NO.1/2B . Find great wholesale source of hot rolled/cold roll stainless steel sheet /plate no.1/2b finish supply for sale in stock here with Shaanxi Rehi - professional hot rolled/cold roll stainless steel sheet /plate no.1/2b finish supply for sale manufacturers and suppliers in China.

Alloy 316/316L Austenitic Stainless Steel Plate ...

Sandmeyer Steel Company stocks the largest single-site stainless steel plate inventory in North America with thicknesses from 3/16" through 6-1/2" in 1/8" increments. Alloy 316/316L stainless steel plate is also available as E-Z Drill for improved machinability. Available thicknesses for Alloy 316/316L:

Stainless Steel - Grade 316L (UNS S31603)

316L is the low carbon version of 316 stainless steel. Covered in thsi document are the physical and mechanical properties of 316L stainless steel. Other areas such as heat treatment, welding, machining, hot and cold working, hardening, work hardening and applications are also outlined.

316 and 316L Stainless Steel Sheet, Coil & Bar - AMS 5524 ...

316 / 316L are austenitic stainless steels that contain molybdenum, which increases their resistance to many chemical corrodents and marine environments. 316L is an extra low carbon version of 316 stainless steel. These materials are more resistant to general corrosion and pitting/crevices than conventional austenitic stainless steels.

Stainless Steel - Harbor Steel

Surface finishes on stainless steel sheets, strip, and plates are generally selected for appearance, although degree and extent of forming and welding should be taken into consideration. Where forming is severe, or much welding is done, it is often more economical to use a cold rolled finish and then polish. Unpolished Finishes

Experienced supplier of 316L stainless steel plate,316 ...

With wide experience and expertise, Bozhong Group is one of the leading 316/316l/316ti/316L stainless steel sheet/plate manufacturers and suppliers. We have hundreds of high-qualified workers at your service. Please rest assured to get the competitive price 316/316l/316ti stainless steel sheet/plate for …

aisi 316l hot rolled stainless steel sheet

Cold rolled low copper aisi 201 304 316L 2b stainless steel plate/sheet AISI201 202 304 316L 410 420 430 1250mm 1500mm hot rolled stainless steelsheet. World Stainless Steel Prices - Meps. Stainless Steel Prices, World, Nickel Prices, 2016, World Stainless Steel Month, Hot Rolled Coil (304), Hot Rolled Coil (316), Hot Rolled Plate (304), Hot

Alloy 316H Stainless Steel Plate - Sandmeyer Steel

General Properties. Alloy 316H (UNS S31609) is a high carbon modification of Alloy 316 developed for use in elevated temperature service. The alloy has higher strength at elevated temperatures and is used for structural and pressure vessel applications at temperatures above 932°F (500°C).

Type 316/316L Stainless Steels Explained - The Balance

Marine grade stainless steel, called type 316, is resistant to certain types of interactions. There is a variety of different types of 316 stainless steels, including 316 L, F, N, H, and several others. Each is slightly different, and each is used for different purposes. The "L" designation means 316L steel has less carbon than 316 steel.

Plate - Rolled Alloys, Inc.

416 stainless steel is a free-machining martensitic stainless steel with 12-13% chromium that can be hardened by heat treatment to higher strength and hardness levels. In the annealed condition, it has...

316 / 316L - Rolled Alloys, Inc.

316/316L Stainless Steel - Molybdenum alloyed austenitic stainless. ... PRODEC® 316/316L - Rolled Alloys Machining grade of 316/L stainless steel for improved machinability and outstanding uniformity.. ... Martensitic PH stainless with high strength, hardness, superior toughness and good corrosion resistance. Nitronic® 50.

SS sheet plate coil Hot Rolled / Cold Rolled ...

An ISO 9001:2008 Certified Company, Randhir Metal (Steel Plates, Sheets and Coil Division) is a leading stockholder, supplier and exporter of ASTM A240 304/304L Stainless Steel Plate. Stainless steel 304/304L plates and stainless steel 316/316L plates, along with Duplex stainless steel plates offer good corrosion resistance to many chemical ...

Stainless Steel Plate 316 L, Stainless Steel Plate 316 L ...

Alibaba offers 56,188 stainless steel plate 316 l products. About 72% of these are stainless steel sheets, 1% are dishes & plates, and 1% are other exterior accessories. A wide variety of stainless steel plate 316 l options are available to you, such as aisi, astm, and jis.

The Difference Between 304 and 316 Stainless Steel | Metal ...

Two of the more commonly used grades of austenitic stainless steel are grades 304 and 316. To help you determine which grade is right for your project, this blog will examine the difference between 304 and 316 stainless steel.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.