Tel: +86-371-86151827

no 1 finish hot rolled ss 430 stainless steel plate 201

Steel grade:no 1 finish hot rolled ss 430 stainless steel plate 201

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

no 1 finish hot rolled ss 430 stainless steel plate 201 Introduction

No 1 Mill Finish Stainless Steel Plate & Sheet | Penn ...

No 1 Mill Finish Stainless Steel Plate & Sheet. Normally, stainless steel sheets are supplied in the 2B or 2D conditions. No. 1 Finish involves rolling stainless steel that has been heated prior to rolling (hot-rolling). The steel is then heat treated, to produce a uniform micro structure (annealing).

stainless steel sheet plate - asiametalltd

330 Cold Rolled Stainless Steel Sheet ... 4'X8' Stainless Steel Sheet Product Details . 201 Inox Coils Stainless Steel Product Details . Best Quality 430 Stainless Steel Plate Product Details ... steel sheet for wall decoration Product Details . 0.2mm 0.3mm thick stainless steel sheet Product Details . mirror finish stainless steel sheet ...[PDF]

Stainless Steel Sheet, Coil and Plate - Atlas Steels Australia

Section 2 – Flat Product – Stainless Steel Sheet, Coil and Plate October 2016 Page 6 – Section 2 atlassteels.au Stainless Steel Coil Plate - ASTM A240M The most efficient route for a stainless steel production mill to produce plate (5mm and over) is in coil form.

Steel Plates Suppliers, Stainless Steel Sheet/Plates ...

Buy high quality 201, 304, 316 and 430 grade stainless steel matt finish stainless steel coils and No.4 finish stainless steel sheets from Metline Industries. We are a stockholder and supplier of best quality No.4 finish stainless steel sheets and coils in thickness range of 0.5mm to 3.0mm.

Home [krdtsteel]

Small knowledge for 430 stainless steel. 1) 430 stainless steel has the ability of oxidation resistance to corrosion, but intergranular corrosion tendency. 2) 30 stainless steel wire is widely used in shaft. 3) It is widely used in food ingredients because of its safety and innocuity. Finish processing for 430 stainless steel

Quality Stainless Steel Sheet & Stainless Steel Plates ...

WINFAST STEEL INDUSTRIAL LIMITED is best Stainless Steel Sheet, Stainless Steel Plates and Seamless Stainless Steel Pipe supplier, we has good quality products & service from China.

China Stainless Steel Plate No.4 Finish, China Stainless ...

There are 10,267 stainless steel plate no.4 finish suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of stainless steel plate no.4 finish respectively. Stainless steel plate no.4 finish products are most popular in …

Stainless Steel Coils - Steel Plates Suppliers

steelplates.in› Stainless Steel Sheets, Plates, CoilsStainless Steel Coils Suppliers, Dealers in India. SS Coils Manufacturers, Wholesalers, SS 304/316 Coils. Buy Jindal Make SS Coils at Wholesale Prices in Mumbai. We Can Offer No.4 Finish, BA Finish, 2B Finish and Hot Rolled No.1 Finish Stainless Steel Coils at Best Prices. Buy SS 304, SS 316, 430, Duplex, 904L Coils!

420j1 Stainless Steel Plates Wholesale, Stainless Steel ...

Product name Stainless steel plate/sheet Standard AISI,ASTM,DIN,EN,SUS,UNS,GB etc Width 8-3000mm Surface BA/2B/NO.1/NO. ,Limited is the leading manufacturer and supplier of stainless steel,duplex and super nickle alloy materials with 20 years experience of supplying to a great variety of end users from different fields.

ASTM A240 304 Stainless Steel Plate | Buy Online | Cut to ...

Buy Metal Online – ASTM A240 304 Stainless Steel Plate – Order Large or Small Quantity Online – Cut to Size Stainless Plate – No Minimum Order

2D Vs 2B Stainless Steel

SSINA: Stainless Steel: Finishes. 1 Finish is produced by rolling stainless steel that has been heated prior to 2B Finish is a bright cold rolled finish commonly produced in the same manner as No. 2D, except that the final light cold rolling pass is done using polished rolls.

Stainless Steel Plate - bestartubes

Stainless Steel Plate Stainless steel plate mainly used in steel bridge,boiler plate,shipbuilding steel,steel armor,automotive steel,roof plate,structural Steel,electrical steel etc. Standards: GB/T14976-2002、GB13296-91、GB9948-88、ASTM/ASME A213/SA213、ASTM/ASME A312/SA312、ASTM/ASME A269/SA269、DIN 17458-85、DIN 17456-85、JIS G 3459、JIS G 3463、JIS G 3448 …

Stainless Steel Sheet, Plate Coil Supplier-Jiangsu Steel Group

Buy Stainless Steel Sheet, Plate Coil at jingsu steel group-Stainless steel strip,stainless steel sheet,stainless steel hot rolled plate,stainless steel cold rolled coil in …

Stainless Steel Plate - bestartubes

Stainless Steel Plate Stainless steel plate mainly used in steel bridge,boiler plate,shipbuilding steel,steel armor,automotive steel,roof plate,structural Steel,electrical steel etc. Standards: GB/T14976-2002、GB13296-91、GB9948-88、ASTM/ASME A213/SA213、ASTM/ASME A312/SA312、ASTM/ASME A269/SA269、DIN 17458-85、DIN 17456-85、JIS G 3459、JIS G 3463、JIS G 3448 …

Stainless steel plate - Foshan Xin Zhan Metal Materials Co ...

China Stainless steel plate catalog of Stainless Steel Sheet Type 430, Cold Rolled Stainless Steel Sheet for Decoration provided by China manufacturer - Foshan Xin …

Stainless Steel Plate & Sheet - 304 Stainless Steel Plate ...

Grade 310S stainless steel (1.4845) is one of the most widely used grades of heat resistant stainless steel supplied into numerous industry sectors. The key properties of this material are its high chromium and medium nickel content making its resistance to oxidation, sulfidation and other forms of hot corrosion its main characteristics.

304 /304L hot rolled stainless steel plate

310S stainless steel sheet. Our company perennial stock stainless steel plate, stainless steel coil as follows: Including 201 202 304 309S 310S 316L 304L 321 430 409L 439 2205 and other materials.All of the products are from the domestic large steel mills: ZPSS …

Stainless Steel Plate & Sheet - STAINLESS STEEL SHEET ...

201 Stainless Steel Coil 430/1.4016 Stainless Steel Coil 304/1.4301 Stainless Steel Coil ... Hot-rolled stainless steel plate: Cold-rolled stainless steel plate. Lower hardness. Hardness. ... Give us a few details about yourself so we can match you with the right Sino Steel (Stainless) associate. CONTACT US +86-532-87868818 +86-532-87961221.

Stainless Steel Plate Sheet - asian-steel

HAIHUI is one of the best stainless steel plate sheet manufacturers in China. As a reliable seller, we provide high quality stainless steel products for sale with low price. Welcome to wholesale bulk customized stainless steel plate sheet at factory price here and get free sample from our factory.

Stainless Steel Coils, Strips, Stainless Steel Wires ...

Offers stainless steel products like stainless steel coils, stainless steel strips, stainless steel wires, stainless steel sheets, stainless steel plate, stainless steel tubes, stainless steel seamless tube, stainless steel welded tubes, stainless steel rods, stainless steel round rod, stainless steel flats, stainless steel flanges, stainless steel circles, stainless steel channels, stainless ...

304 SHEET 2B FINISH - 1/4" Thick, 304 Sheet - Mill Finish ...

Order 304 SHEET 2B FINISH - 1/4" Thick, 304 Sheet - Mill Finish #2 , and Stainless Steel in small quantities and no minimums at The Metal Store.

Stainless Steel Cold Rolled Sheet-Jiangsu Steel Group

Stainless Steel Cold Rolled Sheet provides superior surface finish, tolerance and straightness. This produces steel with closer dimensional tolerances and a wider range of surface finishes. Stainless Steel Cold Rolled Sheet increases the yield and tensile strengths. Key Advantages Of Stainless Steel Cold Rolled …

304 Stainless Steel Plate | Stainless Supply

304 stainless steel plate meets ASTM A240 criteria. Our 304 stainless steel plate is hot rolled, annealed and pickled. The 304 stainless steel plate does not have a polished or brushed finish and does not come with a protective PVC to prevent scratching as …

Quality Cold Rolled Stainless Steel Plate & 304 Stainless ...

Wuxi Clare International Trading Co.,Ltd. is best Cold Rolled Stainless Steel Plate, 304 Stainless Steel Plate and Decorative Stainless Steel Plate supplier, we has good quality products & service from China.

Stainless steel 304/316 sheets and plates stockist and ...

Mukesh Steel is included in Manufacturing and Exporting of brilliant stainless steel 304 sheets, stainless steel 304L plates, stainless steel 304 loops in thickness of 0.3mm to 120mm. that have discovered broad applications in different commercial ventures.

2D Vs 2B Stainless Steel

SSINA: Stainless Steel: Finishes. 1 Finish is produced by rolling stainless steel that has been heated prior to 2B Finish is a bright cold rolled finish commonly produced in the same manner as No. 2D, except that the final light cold rolling pass is done using polished rolls.

Hot Rolled Stainless Steel 409L Plate, Thickness: >5 Mm ...

Prashaant Steel - offering Hot Rolled Stainless Steel 409L Plate, Thickness: >5 Mm at Rs 100/kilogram in Mumbai, Maharashtra. Get best price and read about company and get contact details and address. | ID: 10885318212

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.