Tel: +86-371-86151827

ss 202 plate material specification

Steel grade:ss 202 plate material specification

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

ss 202 plate material specification Introduction

Stainless Steel Grade 202 (UNS S20200) - Material Science

Topics Covered

202 - steel-grades

202. This page provides 202 datasheet, 202 mechanical properties, chemical element 202, technical specifications of 202 steel material properties. 202 performance specifications.

Stainless Steel 202 Grade - Stainless Steel 202 Plates ...

Our clients can avail from us a comprehensive range of Stainless Steel 202 Plates that are manufactured in line with the prevailing industry standards. Our range of stainless steel plates is available in different length, width and other technical specifications.

Stainless Steel Plate - 304, 304L, 316, 316L, 310 and more ...

Penn Stainless Products is a supplier and processer of stainless steel plate in over 30 grades, including 304/L,316/L,309/S, 310/S, duplex, 330 and many more.[PDF]

Plate Specification Guide 2015-2016 - …

* All dimensions listed are approximate maximums. Actual plate sizes available depend on the combination of length, width and thickness as well as material specification. Dimensions and specifications exceeding those listed may be available. For specific information, contact ArcelorMittal USA. ** Refer for acceptance normalized lengths up to 875".

SS 202 Plates at Rs 114.90 /kilogram | Stainless Steel 202 ...

SS 202 Plates - Buy Stainless Steel 202 at best price of Rs 114.90 /kilogram from Max Stainless. Also find here related product comparison. | ID: 9177905588 ... Product Specification. ... SS 202 Plates. We offer SS 202 Plates in compliance with the international quality standards. These are widely used in varied industry applications and are ...

USA AISI AISI 202 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. AISI 202 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Difference between Stainless Steel grade 304 and 202

Type 304 vs. type 202 stainless steel. A discussion started in 2008 but continuing through 2019. October 7, 2008. Q. I purchase housewares for a US retailer, a foreign manufacturer has told me that 202 grade SS is also approved for the food industry. I have not been able to verify this with the FDA.[PDF]

HANDBOOK PECIFICATIONS - SSINA

Stainless steel is not a single alloy, but rather the name applies to a group of iron based alloys containing a minimum of 10.5% chromium. Other elements are added and the chromium content is increased to improve corrosion resistance and/or enhance mechanical properties. There are over 50 stainless steel types originally recognized by the[PDF]

Plate Specification Guide 2015-2016 - …

* All dimensions listed are approximate maximums. Actual plate sizes available depend on the combination of length, width and thickness as well as material specification. Dimensions and specifications exceeding those listed may be available. For specific information, contact ArcelorMittal USA. ** Refer for acceptance normalized lengths up to 875".

USA AISI AISI 202 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. AISI 202 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

SS 202 Plates at Rs 114.90 /kilogram | Stainless Steel 202 ...

SS 202 Plates - Buy Stainless Steel 202 at best price of Rs 114.90 /kilogram from Max Stainless. Also find here related product comparison. | ID: 9177905588 ... Product Specification. ... SS 202 Plates. We offer SS 202 Plates in compliance with the international quality standards. These are widely used in varied industry applications and are ...

supplier of chemical properties aisi 202,A36,Q235B,Q345B ...

stainless steel 202 physical properties,ASTM A572-50,Q345 . Stainless Steel Grade 202 (UNS S20200) - Material ScienceGrade 202 stainless steel is a type of Cr-Ni-Mn stainless with similar properties to A240/SUS 302 stainless steel. The toughness of grade 202 at …

Stainless Steel Sheet Plate (SS) in Grade 304, 304L, 304H ...

SS 309 Bend SS 309 Forged Fittings SS 309 Outlets SS 309 Flanges SS 309 Pipe SS 309 Tube SS 309 Plate SS 309 Bar SS 309 Fasteners SS 310 Pipefittings

ASTM A36 Steel Plate - Completely Specifications You ...

Material Properties/Specifications. We shall explain material specifications from chemicals and mechanical properties. Although, contact us for ASTM A36 standard specification in PDF, we shall send you immediately. Chemical composition of A36 steel plate

Carbon Steel Pipes & Fittings - Steel Plate SS316L / ASTM ...

Material. Size . Schedule. Specification. Manufacturer. 1. Carbon Steel Pipe. 15 NB To 150 NB . Sch. 40s To Sch. XXs. A-106 Gr. B Seamless. MSL / ISMT / Imported with LRS, BV & with IBR Test Certificate. 200 NB To 600 NB . Sch. 20 To Sch. 160. 2. Low Temperature Carbon Steel. 15 NB To 500 NB . Sch. 40s To Sch. XXs. A-333 Gr. 6 Seamless. ISMT ...

How to check the grade of stainless steel 304 or 202 - Quora

How do I check the grade of stainless steel 304 or 202? Update Cancel. Answer Wiki. 8 Answers. ... if there is enough material. Use this sources to check for elemental composition The Online Materials Information Resource and The Online Materials Information Resource. ... 202 Stainless Steel Plate. 202 Stainless Steel Bar. 202 Stainless Steel ...

ASME SA240 304|SA240 304 plate|sa240 304 sheet stainless ...

ASME SA240 304|SA240 304 plate|sa240 304 sheet stainless ASME SA240 standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications sa240 grade 800 800H 904L 201 202 XM-19 XM-31 XM-17 XM-18 XM-19 301 301L 302 304 304L 304H 304N XM-21 304LN 305 309S 309H 309Cb 309HCb 310S 310H 310Cb 310HCb …

Stainless Steel Specification and Composition Chart ...

Excellent formability and weldability. Because of its economy and good resistance to oxidation and corrosion, this stainless offer many opportunities for a wide range of parts. 410 - Heat-treatable stainless used widely where corrosion is not severe - air, fresh water, some chemicals and food acids.

Stainless Steel - Grade 310 (UNS S31000) - Material Science

310 stainless steel was designed for high temperature operation and has good ductility and weldability. It also has excellent corrosion resistance at high temperatures. Consequently, it is mainly used in applications such as furnace parts, heat treatment baskets, heat exchangers etc.

Stainless Steel Chemical Composition, Chemical ... - India

KAD Group of Companies provide Stainless Steel Chemical Composition Table/ Chart

2012 Construction and Material Specifications

columbus.gov› …› Public Service› Design and ConstructionRevisions to the 2012 Construction and Material Specifications ... 202 Removal of Structures and Obstructions . 202 - Removal of Structures and Obstructions (2012) 203 Roadway Excavation and Embankment. ... 522 Structural Plate Corrugated Metal Structures on Footings. 522 - Structural Plate Corrugated Metal Structures on Footings (2012) ...

Stainless Steel 202 at Best Price in India

We are amongst the highly reliable and trusted organization which manufactures, supplies, imports and exports top quality range of Stainless Steel 202 Sheets. These stainless steel 202 sheets are ideal for fabricating different industrial products. Our stainless steel 202 sheets are made from top quality stainless steel which is rust free ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.