Tel: +86-371-86151827

no 4 stain stainless steel sheets

Steel grade:no 4 stain stainless steel sheets

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

no 4 stain stainless steel sheets Introduction

304 Stainless Steel Sheet #4 Brushed Finish | Stainless Supply

304 stainless steel sheet #4 finish is the brushed finish commonly seen on kitchen appliances and backsplashes. The 304 stainless steel sheet #4 finish has a PVC film on one side to help protect against scratching during fabrication and installation. Our 304 stainless steel sheet #4 finish meets the criteria for both the #3 and #4 finish.

China stain/No.4 Finish Stainless Steel Sheets, elevator ...

Stain Finish Stainless Steel Sheets which widely used into kinds of outside decoration of buildings and elevator decoration, and The No.4 Finish Stainless Steel Sheets material surface will be nice, smooth, bright after polishing and they are more suitable to welding, cutting and bending..

304l Stainless Steel Sheet 1.5mm No.4 Stain Finish Plate ...

304l Stainless Steel Sheet 1.5mm No.4 Stain Finish Plate , Find Complete Details about 304l Stainless Steel Sheet 1.5mm No.4 Stain Finish Plate,Stainless Steel Sheet No.4 Stain Finish,Stainless Steel 304l,1.5mm Thick Stainless Steel Plate from Stainless Steel Sheets Supplier or Manufacturer-Tianjin TEDA Ganghua Trade Co., Ltd.

Good Quality No.4 Stain Stainless Steel Sheets 304 - Buy ...

Good Quality No.4 Stain Stainless Steel Sheets 304 , Find Complete Details about Good Quality No.4 Stain Stainless Steel Sheets 304,High Quality No.4 Stain Stainless Steel Sheets,Good Quality Stain Stainless Steel Sheets,No.4 Stainless Steel Sheet 304 from Stainless Steel Sheets Supplier or Manufacturer-Foshan Hengmei Steel Co., Ltd.

No.4 Stain Stainless Steel Sheets 1.4301 1.4401 1.4016 ...

No.4 Stain Stainless Steel Sheets 1.4301 1.4401 1.4016 , Find Complete Details about No.4 Stain Stainless Steel Sheets 1.4301 1.4401 1.4016,Stain Stainless Steel Sheets,Stain Stainless Steel Sheets,No.4 Stain Stainless Steel Sheets from Stainless Steel Sheets Supplier or Manufacturer-Tianjin TEDA Ganghua Trade Co., Ltd.

no.4 stain stainless steel sheets 1.4301 1.4401 1.4016

No.4 Stain Stainless Steel Sheets 1.4301 1.4401 1.4016 ...no.4 stain stainless steel sheets 1.4301 1.4401 1.4016 Product Description Stainless steel is an alloy, which is iron-based and contains various combinations of other elements to give it characteristics suitable for a wide range of applications.

MetalsDepot® - T304 Stainless Steel Sheet

304 Stainless Steel Sheet, is the most popular and economical of the stainless steels. 304 Stainless Sheet offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments. 304 Stainless Sheet may become slightly magnetic when worked and is not heat treatable.California Residents: See Prop 65 Warning

SSINA: Stainless Steel: Finishes

It is produced by Tampico brushing a No. 4 finish sheet in an oil and abrasive medium. This finish is sometimes seen on stainless steel architectural applications that were installed between about 1930 until the 1980’s, including the exterior columnar panels …

304l Stainless Steel Sheet 1.5mm No.4 Stain Finish Plate ...

304l Stainless Steel Sheet 1.5mm No.4 Stain Finish Plate , Find Complete Details about 304l Stainless Steel Sheet 1.5mm No.4 Stain Finish Plate,Stainless Steel Sheet No.4 Stain Finish,Stainless Steel 304l,1.5mm Thick Stainless Steel Plate from Stainless Steel Sheets Supplier or Manufacturer-Tianjin TEDA Ganghua Trade Co., Ltd.

Stainless Steel Sheets - Cut To Size Metal | Stainless Supply

430 stainless steel sheet #4 finish is the brushed finish commonly seen on kitchen appliances and backsplashes. 430 Stainless Steel Sheet #4 finish has a PVC film on one side to help protect against scratching during fabrication and installation. Our 430 stainless steel sheet metal meets the criteria for both the #3 and #4 finish.

2B vs. No. 4 Stainless Steel Finish | All Metals Fabrication

Stainless steel is a unique metal alloy composed of steel (iron/carbon) and chromium. There are a variety of finishes that can be applied to stainless steel, from standard mill finishes, to specialty finishes such as brushed, polished, etched, and bead blasting. Corrosion resistance is a determining factor for a stainless steel finish.[PDF]

Guide to Stainless Steel Finishes

GUIDE TO STAINLESS STEEL FINISHES 2G A uniform uni-directional surface that has low reflectivity. The coarse finish restricts it to internal applications. The profiled stainless steel sheet clad counters of this Bank in Flensburg, Germany, were ground to provide a lively contrast to the smooth wooden surfaces. Mechanically applied finishes may ...

Guide to Stainless Steel Sheet Finishes | Mill, Polished ...

Stainless Steel Sheet Finishes. Stainless steel sheet is produced in many types of finishes due to the various uses and applications that stainless steel can be used in. It has become popular in kitchens due to its low maintenance, cleanliness, appearance, and corrosion resistance to food acids and water.

China Stainless Steel Sheets 304 No 4 Satin Finish with ...

Hairline Stainless Steel, Stainless Steel Metal Sheet, 430 No. 4 Stainless Steel Sheet manufacturer / supplier in China, offering Stainless Steel Sheets 304 No 4 Satin Finish with Laser Cuting Film PVC, Ceramic Corner Metal Stainless Steel U Shaped Tile Edge Trim, Tile Edge Strip 304 Stainless Steel U Shaped Profile and so on.

Amazon: Stainless Steel Sheets

TeamFar Baking Sheet Set of 2, Stainless Steel Baking Pans Tray Cookie Sheet, Non Toxic & Healthy, Mirror Finish & Rust Free, Easy Clean & Dishwasher Safe. by TeamFar. $27.98 $ 27 98 Prime. FREE Shipping on eligible orders. More Buying Choices. $20.99 (6 used & new offers) 4.5 out of 5 stars 172.

No. 4 Polished Finish | Penn Stainless Products

No. 4 Polished Finish. No. 4 Finish is produced with short, parallel polishing lines. These lines extend uniformly along the length of the coil. It is obtained by mechanically polishing a No. 3 finish with gradually finer abrasives. Depending on requirements, the final finish can be between 120 to 320 grit.

MetalsDepot® - T304 Stainless Steel Sheet

304 Stainless Steel Sheet, is the most popular and economical of the stainless steels. 304 Stainless Sheet offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments. 304 Stainless Sheet may become slightly magnetic when worked and is not heat treatable.California Residents: See Prop 65 Warning

Stainless Steel | Mid America Stainless

Mechanical Finish Designations #1 Finish – Hot rolled, annealed and pickled. #2D Finish – A uniform, dull silver gray mill finish that is applied to thinner stainless steel coils, the thickness of which has been reduced by cold rolling. #2B Finish – A bright cold rolled mill finish commonly produced in the same manner as No. 2D, except that the final light cold rolling pass is done using ...

Discount Steel | Stainless Steel Backsplashesl | Brushed ...

No matter your objectives, a beautifully crafted stainless steel backsplash will significantly improve the look and function of your home. **Please note: Brushed stainless steel has a direction to the grain. Please specify which dimension the grain should run within the special instructions/comments box.**

How to do Satin Finish on Stainless Steel

Satin finish on welds on 304 stainless steel sheets 2006. Q. I am trying to obtain a uniform satin finish on 304 2B stainless steel sheets. I have great results with an orbital sander using 60 grit, but I am having difficulty bringing the welds back to the same finish.

Stainless Steel - Online Metal Store

Stainless steel metal is a versatile material offering corrosion resistance, strength, good pricing, and a wide range of shapes. Stainless steel is generally formable and weldable, making it a popular choice in both structural and design applications (including Backsplashes).

No 4: The Workhorse Finish - Australian Stainless Steel ...

No 4 finish stainless steel is the workhorse of the light fabrication industry. The easiest of the finishes to maintain, No 4 finish is used for work surfaces, handrails and where appearance is important. A 'No 4' surface is produced by cutting the surface with abrasive belts to remove a very small amount of metal without affecting its thickness.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.