Tel: +86-371-86151827

hot rolled slit coil steels

Steel grade:hot rolled slit coil steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hot rolled slit coil steels Introduction

Hot Rolled Steel Sheet & Coil | Alliance Steel

alliancesteel.net› ProductsSlit Width Tolerance: +/-.005. Alliance Steel’s hot rolled steel sheet & coil service capabilities include slitting, shearing, blanking, stretcher leveling, degreasing and brushing and metallurgical support. Hot rolled steel products will scale when in contact with oxygen and water vapor after the forming process.

Hot Rolled Steel | Steel Slitting | Narrow Slit Coil | CMSI

At Consolidated Metal Service, Inc., we offer hot rolled steel slitting with a special emphasis on narrow slit coil. Whether the hot rolled steel is from our metal inventory or from yours, we slit coils as narrow as .250 inches and as wide as 48 inches! HRP&O Steel slit coil is commonly used in:[PDF]

Hot-Rolled Steel Sheets and Coils

Hot-Rolled Steel Sheets and Coils meeting a variety of standards ranging from mild steels to high-tensile strength steels are available. Variable sizes of cut sheets, coils, and various surface fi nishes such as black fi nish, pickled ... Hot-Rolled Slit Coil Pickled Slit Coil Hot-Rolled Slit Sheet Shot Blast Coil Pig Iron Converter Coal Coking ...

Coil and Slit Strip Steel | Cold & Hot Rolled | Galvanised

NJR Steel branches stock a broad range of cold- rolled, galvanised and hot -rolled sheet and plate which have been cut from coils. These sheets and plates can then be slit into multiple narrower widths used to fabricate flat bar, tubing and lip channel, or cut to custom lengths to suit fabricators’ and engineers’ specific requirements.

Hot Rolled Steel Slit Coils, Hot Rolled Steel Slit Coils ...

Alibaba offers 24,188 hot rolled steel slit coils products. About 65% of these are stainless steel sheets, 14% are stainless steel strips, and 8% are steel sheets. A wide variety of hot rolled steel slit coils options are available to you, such as aisi, astm, and jis.

Slit Edge Stainless Steel Metal Sheet Hot Rolled 316L ...

Slit Edge Stainless Steel Metal Sheet Hot Rolled 316L Stainless Steel Coil . Description: STAINLESS STEELS are iron-base alloys that contain a minimum of about 12% Cr,the amount needed to prevent the formation of rust in unpolluted atmospheres (hence the designation stainless).

Hot Rolled - russelmetals

Hot rolled steel is rolled on a continuous strip mill, generally above 1600°F (870°C), to the desired thickness. The steel is supplied with either a standard “black” finish, or pickled and oiled, in slit coil …

Steel Coil - Cold Rolled Steel Coils Wholesaler from Nagpur

keeping track with latest market development, we are engaged in providing our clients with a high quality range of Hot Rolled Steel Coils. Hot Rolled Steel Coils / Sheets are the most economical steel sheets available for a wide variety of applications. Hot Rolled Steel Coils are easy to weld, form and drill, and has a slight grainy surface.

Steel Coils - Commerce Steel Corp.

Your #1 Steel Distributor for Hot Rolled, Cold Rolled, and Coated Steel Sheets and Coils. Truth is, with so many types and sizes of steel on the market, it can be a huge challenge to find the exact item you need when you need it. We encourage you to call us.

Metal Slitting | Cold Rolled Steel | Hot Rolled Steel | HRPO

Consolidated Metal Service, Inc. was founded in 1982 and today is a recognized leader in the custom steel slitting, edge conditioning, toll processing, and distribution of all varieties of ferrous and non-ferrous metals, with a special focus on precision narrow slit coil.

What Is Hot Rolled Pickled and Oiled (HRPO) Steel ...

Thus, hot rolled pickled and oiled (from here on referred to as HRPO) flat rolled steel coils were born. HRPO steel is still considered hot rolled steel even though it does not have any scale. The final product of HRPO steel is created when steel mills use acid baths to remove the scale that usually forms on the surface of carbon steel coil, as ...

Slit Coil / Coil Reduction – Hot Rolled – General | Macsteel

Slit Coil / Coil Reduction – Hot Rolled – General; Slit Coil / Coil Reduction – Hot Rolled – General Product Enquiry; Technical Data; Business Units ... Macsteel supplies the entire Sub-Saharan geographic region with the broadest range of carbon steel, stainless steel, speciality steels, aluminium products and value added processes to ...

Hot Rolled Pickled and Oiled | HRPO Steel | HRPO Coil ...

Hot rolled pickled and oiled steel is typically flat. The pickling process removes the scale from the hot rolled steel surface by for applications that require a clean, uniform surface and good flatness. The pickling process removes scale from the hot rolled sheet surface by utilizing water and other inorganic solutions at the mill.

Hot Rolled Slit Steel Coils, Hot Rolled Slit Steel Coils ...

Alibaba offers 23,669 hot rolled slit steel coils products. About 65% of these are stainless steel sheets, 9% are steel sheets, and 1% are aluminum coils. A wide variety of hot rolled slit steel coils options are available to you, such as hot rolled, cold rolled.

Hot Rolled Pickled & Oiled (HRPO) Steel Sheet & Coil ...

alliancesteel.net› Products› Hot Rolled SteelExtend longevity in corrosive environments with hot rolled pickled and oiled steel products from Alliance Steel. Hot rolled pickled and oiled sheet & coil have been descaled of oxide film and oiled to help combat corrosion during storage and when in use. Contact us today to request a quote.

Sheet and Coil - russelmetals

HOT ROLLED COIL AND SHEET STEEL Hot rolled steel is rolled on a continuous strip mill, generally above 1600°F (870°C), to the desired thickness. The steel is supplied with either a standard “black” finish, or pickled and oiled, in slit coil or sheet form. Quality Relevant Specifications Characteristics

Cold Rolled Steel Coil and Hot Rolled Steel Coil

To put it simply, cold rolling is performed on the basis of hot-rolled coils. Generally speaking, it is hot-rolling, pickling, and cold-rolling. Cold rolling is performed at a normal temperature by hot-rolled sheet. Although the steel sheet is heated during rolling, it is still called cold-rolled.[PDF]

ALUMINIZED COIL AND SHEET COLD ROLLED COIL …

HOT ROLLED COIL AND SHEET STEEL General Hot rolled steel is rolled on a continuous strip mill, generally above 1600°F (870°C), to the desired thickness. The steel is supplied with either a stan-dard “black” finish, or pickled and oiled, in slit coil or sheet form. …

Stainless Steel Slit Coil « Rolled Steel Products

Stainless Slit Coil. Rolled Steel Products stainless steel slit coil is produced in our Los Angeles facility. Our company is committed to provide your company with any stainless steel strip, stainless steel coil, and metal processing needs.Our service center has the ability to process almost any requirement you need for stainless coil and to insure the highest possible quality standards.

Metal Slitting | Cold Rolled Steel | Hot Rolled Steel | HRPO

Consolidated Metal Service, Inc. was founded in 1982 and today is a recognized leader in the custom steel slitting, edge conditioning, toll processing, and distribution of all varieties of ferrous and non-ferrous metals, with a special focus on precision narrow slit coil.

Cold Rolled Steel Coil - steels-supplier

ANSON STEEL supplies Cold Rolled Steel Coil Product suitable for wide Applications, main standard include JIS G3141, EN10130, EN10268, GB/T5213. Cold rolled steel coil can be slit into any size with a width of ≤1430mm( coil slit ) according to customer's requirements; it can also be uncoiled and cut to length( cold rolled steel sheet ) ,

What’s the Difference Between Hot and Cold Rolled Steel ...

One key distinction among prefabricated steel products is the difference between hot rolled versus cold rolled steel. ... manufacturers spin the rolled steel into coils and leave it to cool. For ...

Hot Rolled Steel | Hot Rolled Coils | Hot Rolled Sheets ...

JSW Steel manufactures Hot Rolled (HR) coils at its state-of-the-art Hot Strip Mills (HSM), at Vijayanagar (Karnataka) and Dolvi (Maharashtra).. Vijayanagar HSM-I and HSM-2 with commissioned capacities of 3 MTPA and 5 MPTA respectively are equipped with sizing presses and an automatic line inspection facility which makes this facility the widest Hot Strip Mill in India.

Difference Between Hot and Cold Rolled Steel | Metal ...

Customers often ask us about the differences between hot rolled steel and cold rolled steel.There are some fundamental differences between these two types of metal.The differences between hot rolled steel and cold rolled steel relates to the way these metals are processed at the mill, and not the product specification or grade.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.