Tel: +86-371-86151827

variable nozzle rings nozzle plate for turbocharger

Steel grade:variable nozzle rings nozzle plate for turbocharger

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

variable nozzle rings nozzle plate for turbocharger Introduction

Variable Geometry Turbocharger (VGT) – x-engineer.org

x-engineer.org› …› ICE Components & SystemsFluid Flow Through A Pipe

nozzle ring - Turbocharger Pros

nozzle ring found in: Turbocharger, …Mans, 24 Hours of Le Mans, and Pikes Peak. Garrett brought to turbochargers the first variable nozzle turbines (VNT), the …

Function of nozzle ring in turbocharger Archives - Marine ...

Function of nozzle ring in turbocharger. To change pressure energy to velocity (kinetic energy) Function of shroud ring in turbocharger. Shroud ring is a component in turbochargers which forms a part of the inner exhaust gas casing adjacent to the turbine. The area around the turbine is always in contact with highly corrosive exhaust gases.

Genuine Melett UK Turbocharger Variable VNT Nozzle Ring ...

ebay› …› Turbos & Superchargers› Turbochargers & PartsWelcome to this Buy It Now listing for a DIRECT REPLACEMENT Genuine Melett Turbocharger VNT Nozzle Ring assembly. The Turbo Nozzle Ring is often the cause of many boost related issues on VNT Turbochargers due to wear, damage and carbon build up. Melett Nozzle Rings meet or exceed the original equipment.Seller Rating: 99.8% positive

VGT Nozzle Ring Shroud Plate for Cummins Holset Turbo ...

VGT Nozzle Ring Shroud Plate for Cummins Holset Turbo HE551V for Shallow Exhaust Housings VGT Nozzle Ring Shroud Plate for CUMMINS ISX Holset HE551V Turbo part number 2881993RX 2881994RX. Interchange part number for the turbo that the parts would also fit are:

Variable-geometry turbocharger - Wikipedia

Variable-geometry turbochargers (VGTs), (also known as variable nozzle turbines/VNTs), are a family of turbochargers, usually designed to allow the effective aspect ratio (A:R) of the turbo to be altered as conditions change. This is done because optimum aspect ratio at low engine speeds is very different from that at high engine speeds.Most common designs·

Function of nozzle ring in turbocharger Archives - Marine ...

Function of nozzle ring in turbocharger. To change pressure energy to velocity (kinetic energy) Function of shroud ring in turbocharger. Shroud ring is a component in turbochargers which forms a part of the inner exhaust gas casing adjacent to the turbine. The area around the turbine is always in contact with highly corrosive exhaust gases.

VGT Nozzle Ring Shroud Plate for Cummins Holset Turbo ...

VGT Nozzle Ring Shroud Plate for Cummins Holset Turbo HE551V for Shallow Exhaust Housings VGT Nozzle Ring Shroud Plate for CUMMINS ISX Holset HE551V Turbo part number 2881993RX 2881994RX. Interchange part number for the turbo that the parts would also fit are:

We offer a wide range of complete turbo variable nozzle rings

We offer a wide range of complete turbocharger variable nozzle rings: Covering many turbo models including: GT15-25V, TF035, TD03 & TD04, RHV4, CT16 & CT26 turbos; 10, 11 and 13 blade versions available – all produced with solid vanes for improved strength; Precision manufactured to the highest possible standards.

Turbo Nozzle Ring - adatec.aliexpress

Shopping for Cheap Turbo Nozzle Ring at ADATEC Turbocharger Store and more from bmw m57,nozzle ring,holset turbo,ring nozzle,turbo charger,turbo vnt on Aliexpress ,the Leading Trading Marketplace from China

VTL Group | Products | Turbochargers

Nozzle Ring Assembly. Variable Geometry Nozzle Ring. Variable Geometry Shroud Plate. Impeller. Impeller. Compressor Cover. Turbo Housing. Water Cooled Turbo Housing. Wastegate Turbo Housing. Diffuser. Central Housing. Diffuser. Certification. Home About VTL. VTL …

turbocharger nozzle ring variable geometry calibration ...

The Variable Nozzle Turbocharger Analyser is the most advanced equipment to adjust turbocharger geometries. It introduces the minimum and maximum flow test. The ‘artificial vision’ to adjust the turbocharger vane is an exclusive Turboclinic technological feature.

Genuine Melett UK Turbocharger Variable VNT Nozzle Ring ...

ebay› …› Turbos & Superchargers› Turbochargers & PartsWelcome to this Buy It Now listing for a DIRECT REPLACEMENT Genuine Melett Turbocharger VNT Nozzle Ring assembly. The Turbo Nozzle Ring is often the cause of many boost related issues on VNT Turbochargers due to wear, damage and carbon build up. Melett Nozzle Rings meet or exceed the original equipment. Photo is for illustration purposes only.Seller Rating: 99.8% positive

Variable Turbine Area (VTA) - turbocharger.man-es

MAN Energy Solutions’ solution is the VTA (variable turbine area) technology which is now offered as an option for radial TCR and axial TCA turbochargers. How VTA works. The VTA system consists of a nozzle ring equipped with adjustable vanes which can replace the fixed-vane nozzle rings in MAN Energy Solutions’ standard TCA and TCR ...

turbo Nozzle ring - Shop Cheap turbo Nozzle ring from ...

Shopping for Cheap turbo Nozzle ring at MAX ABLE AUTO PARTS CO.,LTD. and more from turbocharger nozzle ring,nozzle ring,td04 turbo on Aliexpress ,the …

Genuine Melett Turbo Variable Vane VNT Nozzle Ring …

ebay› …› Turbos & Superchargers› Turbochargers & PartsWelcome to this Buy It Now listing for a DIRECT REPLACEMENT Genuine Melett Turbocharger VNT Nozzle Ring assembly. The Turbo Nozzle Ring is often the cause of many boost related issues on VNT Turbochargers due to wear, damage and carbon build up. Melett Nozzle Rings meet or exceed the original equipment. Photo is for illustration purposes only.Seller Rating: 99.8% positive

Holset Variable Geometry Turbochargers - My Holset Turbo

Holset Variable Geometry Turbochargers. The key to turbocharging is to maximize and control the boost pressure over as wide a field of engine operation as possible. Holset patented VGT™ technology gives infinite control of boost pressure. ... The sliding nozzle ring alters the aperture through which the exhaust gases flow onto the turbine ...

Variable-geometry turbocharger - Wikipedia

Variable-geometry turbochargers (VGTs), (also known as variable nozzle turbines/VNTs), are a family of turbochargers, usually designed to allow the effective aspect ratio (A:R) of the turbo to be altered as conditions change. This is done because optimum aspect ratio at low engine speeds is very different from that at high engine speeds.

China Variable Nozzle Rings Nozzle Plate for Turbocharger ...

China Variable Nozzle Rings Nozzle Plate for Turbocharger, Find details about China Turbo Vnt Parts, Auto Parts from Variable Nozzle Rings Nozzle Plate for Turbocharger - Changzhou E&E Turbo …

RHF4 Nozzle Turbo VNT Parts with certificate of Turbo VNT ...

Product Tags: VNT Turbo parts Variable Nozzle Rings RHF4 Nozzle Turbo VNT Parts Changzhou E&E Turbo-Power Co., Ltd. E&E Turbo-Power Co., Ltd. is one of the largest manufacturer & suppliers for high-quality turbocharger & turbo parts in replacement & performance market since 2002.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.