Tel: +86-371-86151827

cold rolled stell coils 092

Steel grade:cold rolled stell coils 092

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

cold rolled stell coils 092 Introduction

cold rolled stell coils 092 coils spcd - vamosargentina.net

cold rolled stell coils 092 coils - hotelsonali.in. cold rolled stell coils 092 coils tradestead china cold rolled steel coil--Shanghai BEBON ... C1018 Cold Finish Flat, is a rolled steel product with close dimensional accuracy, smooth surface finish, and increased mechanical properties and machinability.C1018 Cold Finish Flat is a general purpose low carbon steel with good case hardening ...[PDF]

U003en Cold-Rolled Steel Sheets and Coils

Nippon Steel & Sumitomo Metal’s High-Strength Cold-Rolled Steel Sheets and Coils are classified into the following six categories, depending on their forming properties such as strength, ductility, and balance between strength and yield point.

Cold Rolled Sheet Stell, Cold Rolled Sheet Stell Suppliers ...

Alibaba offers 321 cold rolled sheet stell products. About 32% of these are steel sheets, 1% are doors. A wide variety of cold rolled sheet stell options are available to you, such as aisi, astm, and din.

Cold Rolled Steel - Metal Supermarkets

The term Cold Rolled is mistakenly used on all products, when actually the product name refers to the rolling of flat rolled sheet and coil products. When referring to bar products , the term used is “cold finishing”, which usually consists of cold drawing and/or turning, grinding and polishing.

Hot Rolled Steel Vs. Cold Rolled Steel | Sciencing

Materials ranging from the sheet metal in cars to the tubing in bicycle frames can be created from cold-rolled steel. The finished material appears dark gray and has a smooth, reflective surface that is resistant to corrosion, thanks to a stable oxidation film on the surface of the finished steel.

Steel Coils for Sale | Hascall Steel Company

Cold Rolled. A cold rolled metal coil is manufactured by removing rust from a hot rolled coil, soaking it in acid, then washing and drying the sheet. The sheet then passes through a reducing mill under pressure. Unlike hot rolled steel coil, it is a more finished product with a smoother surface. It also has greater strength and durability.

Cold Rolled Steel Sheet & Coil | Alliance Steel

alliancesteel.net› ProductsCold rolled steel is commonly used for applications in which dimensional tolerances, strength and surface finish quality are critical. Applications that use cold rolled steel products include metal furniture, automobile components, electronics hardware, home appliances and …

What’s the Difference Between Hot and Cold Rolled Steel ...

One key distinction among prefabricated steel products is the difference between hot rolled versus cold rolled steel. ... For sheet metal, manufacturers spin the rolled steel into coils and leave ...

Stainless Steel Sheets, Cold Rolled Steel & Galvanized ...

Stainless Steel Flat Rolled Coil Rolled Steel Products offers the following types of Stainless Steel Flat Rolled Coil Austenitic stainless steels contain chromium and nickel (300 Series types) as well as chromium, nickel and manganese (200 Series types). Most stainless slit coils can be hardened by cold-working but not by heat treatment.[PDF]

Hot-Rolled Steel Sheets and Coils

Sumitomo Metal manufactures a wide range of Hot-Rolled Steel Sheets and Coils in accordance with Japanese Industrial Standards (JIS), the standards of other countries, and our own strict standards. Our Hot-Rolled Steel Sheets and Coils are applied to a wide range of uses such as,

Cold rolled coil News, Prices & Expert Analysis | Metal ...

Fastmarkets MB price book contains over 950 global metal prices including steel prices and scrap prices. Please enter your email address below to start a free trial to access this powerful metals pricing tool.

Steel sheet in coils - Transport Information Service (TIS ...

tis-gdv.de› Home› Cargo information› Cargo site mapPickled and oiled hot-rolled coils/cold-rolled coils: The coil is first secured with at least one steel strap in the transverse and longitudinal direction. The edges of the external and internal diameters of the coil should then be covered with edge protectors made from e.g. paperboard, in order to protect subsequent layers of paper and film ...

cold rolled stell coils 092 coils spcd - vamosargentina.net

cold rolled stell coils 092 coils - hotelsonali.in. cold rolled stell coils 092 coils tradestead china cold rolled steel coil--Shanghai BEBON ... C1018 Cold Finish Flat, is a rolled steel product with close dimensional accuracy, smooth surface finish, and increased mechanical properties and machinability.C1018 Cold Finish Flat is a general purpose low carbon steel with good case hardening ...

Common Uses for Cold Rolled Steel - Mead Metals, Metal ...

Cold Rolled Steel is ideal for projects where precision is essential. The metal is easily formable for moderate draw applications. This makes it ideal for use in many home appliances and metal furniture. Metal filing cabinets and school lockers are commonly made of this metal. In construction, Cold Rolled Steel is a common material for building ...

Coil Stell, Coil Stell Suppliers and Manufacturers at ...

Alibaba offers 606 coil stell products. About 23% of these are steel sheets, 1% are zinc alloy jewelry. A wide variety of coil stell options are available to you, such as aisi, astm, and din.

Cold Rolled Steel Alloys, 1018 Steel, 1045 Steel, 4140 ...

The chemical structure of Cold Rolled Steel is similar to Hot Rolled Steel, but Cold Rolled offers a better surface finish. Order Cold Rolled Steel Alloys in 1018 Steel, 1045 Steel, 4140 Steel, and Stainless Steel Sheets in small quantities and no minimums of all Cold Rolled Steel …[PDF]

ALUMINIZED COIL AND SHEET COLD ROLLED COIL …

TOLERANCES COLD ROLLED. Thickness Tolerances. 2 inches to 12 inches Wide in Coils or Cut Lengths Allowable Tolerances (Plus or Minus) of Specified Thickness – Inches Over .057 Over .039 Over .019 Over .014 Specified Width to .082 to .057 to .039 to .019 Inches incl. incl. incl. incl. 2 to 12 incl.

Cold Rolled Steel Suppliers - ThomasNet

thomasnet› Supplier DiscoverySteel: Cold Rolled manufacturers, service companies and distributors are listed in this trusted and comprehensive vertical portal. The comprehensive directory provides access to full contact and ability information for sourcing professionals, engineers and researchers wishing to get information on Steel: Cold Rolled.

Metal Coils - Cold Rolled Coils Manufacturer from Chennai

We offer Cold Rolled Coils ends that are highly demanded in various production industries. At the stage of manufacturing process the HR the ends are removed. Same as in case of CR, the ends are removed. This concept is known as Head End or tail end, which is a part of our trade.

The Difference Between Hot Rolled Steel and Cold Rolled ...

The change of cold rolled steel shape is a continuous cold deformation, and the cold hardening of this process causes the strength, hardness, and toughness of hard rolled coil to decrease. For end users, cold rolling deteriorates the stamping performance, and the product is suitable for simple deformed parts.

Steel sheet in coils - Cargo Handbook - the world's ...

Cold rolled steel sheeting. A type of handling damage often encountered with cold rolled steel coils is often referred to as ovalisation, which can be caused by lowering a coil at such a speed that it lands heavily. This can result in the unit being forced out of the round so that it becomes oval in shape.

Cold-formed steel - Wikipedia

When steel is formed by press-braking or cold rolled forming, there is a change in the mechanical properties of the material by virtue of the cold working of the metal. When a steel section is cold-formed from flat sheet or strip the yield strength, and to a lesser extent the ultimate strength, are increased as a result of this cold working, particularly in the bends of the section.History·

Cold Rolled Steel | Cascadia Metals

Cold Rolled Steel coil is produced as a feedstock for metallic-coated coils such as galvanized or galvannealed steel. Cold Rolled Steel has an improved surface finish which makes it ideal for use in furniture, appliances and other consumer goods. Cold Rolled Steel can also be powder coated for post-paint applications.

Cold Rolled Steel Coils & Sheets |China| Sinowell Metal

Cold Rolled Steel Coil. When it comes to cold rolled steel coils and sheets, Sinowell Metal offers the widest selection of cold rolled steel sheets in coils grades in the business with the deepest inventory , so that you can rest assured that you get the product you need when you need it.

Hot Rolled vs Cold Rolled Steel | Metal Casting Blog

Cold rolled steel is stored and sold in coiled form after rolling. Steel comes in many grades, specifications, shapes, and finishes—the World Steel Association lists over 3,500 different grades of steel, each with unique properties. The various types mean that steel can by widely used in infrastructure, appliances, vehicles, wind turbines, and many more applications.

Cold Rolled & Galvanized & Galvalume & Prepainted Coils ...

Sinowell Metal ranks well in the galvanized steel industry for commitment to quality and service. As manufacturers and suppliers of cold rolled coils, and hot dipped galvanized steel coils, Galvalume steel coils, PPGI coils. we lay emphasis on ease of use and durability in each finished material.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.