Tel: +86-371-86151827

d steel sheet in coils for

Steel grade:d steel sheet in coils for

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

d steel sheet in coils for Introduction

[PDF]

Hot-Rolled Steel Sheets and Coils

The measuring positions for steel coil thickness are as follows: in the case of a mill edged steel coil or sheet, an arbitrary point 25 mm or more from the edge is selected; for a cut edged steel plate or sheet cut from coil, an arbitrary point of 15 mm or more from the edge is selected.

stainless steel sheet and strip in coils. Stainless steel ...

Scope Description: This stainless steel strip in coils is a specialty foil with a thickness of between 20 and 110 microns used to produce a metallic substrate with a honeycomb structure for use in automotive catalytic converters. The steel contains, by weight, carbon of no more than 0.030 percent, silicon of no more than 1.0 percent,...

Slit Coil and Sheet - H&D Steel

Slit Coil and Sheet H&D Steel’s core business is the provision of slit coil to our clients in Manufacturing, Stamping, Roll Forming, Consumer Durables, Building and …

Sheet & Coil Steel - Continental Steel & Tube Company

Sheet & Coil Steel Hot Rolled Sheet & Coil Steel. Commercial Steel; Drawing Steel; Deep Drawing Steel; HSLA; HRP&O; Abrasion Resistant; Cold Rolled Sheet & Coil Steel. Commercial Steel; Drawing Steel; Deep/Extra Deep Drawing Steel; Tension Leveled; Corrosion Resistant Sheet & Coil Steel. Hot Dipped Galvanized; Electrogalvanized; Aluminized ...[PDF]

U003en Cold-Rolled Steel Sheets and Coils

The position for measuring thickness is the normal position for coil, and for steel sheet it is 15 mm in from both edges. In the case of a width less than 30 mm, the position is the center of the width. Standards. Alloying elements other than those listed in the table may be added as need arises.

Steel Coils Sheets in Faridabad, Haryana - D. M. METALLOYS ...

Registered in 2014, D. M. Metalloys Pvt. Ltd. has been a leading name in offering top notch Coils.Located in Faridabad, Haryana, we offer the best quality Steel Coils Sheets to our customers at best prices in the industry.

Galvanized Steel Sheet - Galvanized Steel Coil | Curtis ...

curtissteelco› Sheet & CoilCurtis Steel is the leading supplier of galvanized steel sheet & coil. Material types for galvanized coil & sheet steel include commercial steel, forming steel, deep drawing steel, structural steel & more. Our products are manufactured to meet ASTM A653 & ASTM A879 specifications. Learn more about galvanized steel & our product offerings by visiting our website.

Steel Coil, Steel Coil Suppliers and Manufacturers at ...

Alibaba offers 711,377 steel coil products. About 12% of these are steel sheets, 7% are other metal & metallurgy machinery, and 2% are stainless steel sheets. A wide variety of steel coil options are available to you, such as coil, plate, and screens & room dividers.

Sheet Metal Coil, Sheet Metal Coil Suppliers and ...

Sheet metal coil/secondary ppgi coils/prime cold rolled steel ppgl and ppgi coils. And whether sheet metal coil is high-strength steel plate, wear resistant steel, or silicon steel. There are 67,552 sheet metal coil suppliers, mainly located in Asia. The top supplying countries are China (Mainland), Taiwan, and Japan, which supply 98%, 1%,...

Steel Warehouse Company: Coil Calculators

Steel Warehouse is steel service center providing processing services for production-ready steel to metal stampers, fabricators and manufacturers. Steel Warehouse Company: Coil Calculators Business Partner Login Find Your Sales Rep Calculators

Steel Coil and Steel Sheet Products - Surdex

Steel Coil and Steel Sheet Products. Surdex Steel specialises in supplying Steel Coil and Steel Sheet solutions to the Victorian market, whatever application you have, automotive components, manufacturing parts, air conditioning ducts, we have the material you need.[PDF]

THE PROTECTION OF FLAT-ROLLED STEEL PRODUCTS …

The fact that sheet steel is normally processed in coil form presents additional problems to the steel producer because of the “nesting” configuration assumed by steel surfaces in a coil. In the manufacturing plant, the most important consequence of this configuration is that the surfaces of interest are virtually inaccessible during a critical

Stainless Steel Sheet and Strip in Coils From the Republic ...

Scope of the Order. The merchandise subject to the CVD order consists of stainless steel sheet and strip in coils from Korea. Stainless steel is alloy steel containing, by weight, 1.2 percent or less of carbon and 10.5 percent or more of chromium, with or without other elements.

Steel Coil and Steel Sheet Products - Surdex

Steel Coil and Steel Sheet Products. Surdex Steel specialises in supplying Steel Coil and Steel Sheet solutions to the Victorian market, whatever application you have, automotive components, manufacturing parts, air conditioning ducts, we have the material you need.[PDF]

Stainless Steel Sheet, Coil and Plate - Plucka

steel coils in thickness up to 6mm (8mm for aluminium) and in widths to 2000mm. This enables an extensive range of cold and hot rolled coils to be held with the flexibility to convert into small coils, sheet, strip and plate in standard and customised lengths.

Galvanized Coils Sheets - Galvanized Coils, Galvanized ...

Galvanized Coils/Sheets (Plain/Corrugated) Vardhman Industries Ltd. offers a comprehensive range of galvanized coils, galvanized sheets, galvanized steel coils, hot dip galvanized coils, galvanized steel sheets, plain steel sheets, corrugated steel sheets and cold rolled steel coils, which have carved a niche in domestic as well as overseas market.

Scope Information: Stainless Steel Sheet And Strip In ...

Scope Description: The products covered by the order are certain stainless steel sheet and strip in coils. Stainless steel is an alloy steel containing, by weight, 1.2 percent or less of carbon and 10.5 percent or more of chromium, with or without other elements. The subject sheet and strip is a flat-rolled product in coils that is greater than ...

d steel strip coil sheet - SEM Steel - nankingrestaurant.in

U003en Cold-Rolled Steel Sheets and Coils. Cold-Rolled Steel Sheets and Coils are extensively used as basic materials in automobiles, electrical appliances, steel office equipment, various types of continuous descaling and cold-rolled steel sheet and coil mills (CDCM). Converter Cold-Rolling Annealing Hot-Rolling. 10 11 1.

Stainless Steel Coil, Sheet, Strip and Plate Sourcing ...

COIL, SHEET, STRIP AND PLATE. We service customers’ needs from coast-to-coast, and can offer any item delivered to your door. Chicago Stainless is your alternative source of supply for your stainless steel stock buyout and inventory requirements. If there is an item we don’t have in stock, we will source it for you, or refer you to a supplier who can help.[PDF]

COLD ROLLED CARBON STEEL SHEET, ANNEALED …

sufficiently over the ends of the sheet mentioned in (d) above. f) Steel ring made from thick angle sheets shall be placed on the rim of the inner diameter at both ends of the coil. The rings shall be held at either ends at four points by steel bands. g) The coil should then be mounted on wooden skids held together by steel …

Produces and supplies coil steel, sheet steel, and blanked ...

cold rolled sheet steel, cold rolled strip steel, Coil steel, sheet steel, blanked flat foll steel, cold rolled steel, hot rolled steel, slit steel, annealled steel, hardened and tempered steel, polished steel, oscillate wound steel, flat roll steel products, strip steel, cold rolled strip steel, hrpo steel, rolled steel, cut to length steel, coated steel, bandsaw steel, hot rolled pickled and ...

hot rolled steel sheet in coil - China HS code & import ...

Latest China HS Code & tariff for hot rolled steel sheet in coil - Tariff & duty, regulations & restrictions, landed cost calculator, customs data for hot rolled steel sheet in coil …

Hot Dip Galvanize Steel - Zero Spangle Galvanized Steel ...

Appropriate for varied industrial applications, these steel coils and sheets are widely used in engineering, petrochemical, chemical, construction and paper industries. In order to guarantee its quality, this steel coil and sheet is severely tested on varied standards.[PDF]

THE PROTECTION OF FLAT-ROLLED STEEL PRODUCTS …

The fact that sheet steel is normally processed in coil form presents additional problems to the steel producer because of the “nesting” configuration assumed by steel surfaces in a coil. In the manufacturing plant, the most important consequence of this configuration is that the surfaces of interest are virtually inaccessible during a critical

Carbon Steel Coil - Carbon Alloy Sheets | TW Metals

Our coil & sheet inventory is stocked in master industry sizes. Aluminum alloys include 1100, 2024, 3003, 5052, 6061, 6013, and 7075. Stainless steel products include 304/304L, 304 polished, 316/316L, 321, 410, 430. All material is stenciled and inventoried for full traceability.[PDF]

IS 277 (2003): Galvanized Steel Sheets (Plain and …

5.1 The base metal of plain galvanized sheets and coils shall conform to IS 1079 or IS 513 as the case may he. S.I.I When it is not possible to test the base metal before galvanizing, the base metal may be tested after stripping offthe zinc coating. 5.1.2 Forcorrugated sheets, the maximum phosphorus content maybe0.09 percent.

ASTM A525 - STANDARD SPECIFICATION FOR GENERAL ...

This specification covers the general requirements for the delivery of steel sheet in coils and cut lengths, zinc-coated (galvanized) on continuous lines by the hot-dip process. Galvanized steel sheet is customarily available in commercial quality, lock-forming quality, drawing quality, drawing quality special killed, and structural (physical ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.