Tel: +86-371-86151827

stainless steel plate thickness 201 304

Steel grade:stainless steel plate thickness 201 304

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

stainless steel plate thickness 201 304 Introduction

304 Stainless Steel Plate | Midwest Steel & Aluminum

304 Stainless Steel Plate. 304 Stainless Plate, the most widely used of the stainless and heat resisting steels. 304 stainless plate offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments Typical specifications for 304 Plate and 304L Stainless Steel Plate are ASTM A-240, ASME SA -240 and A666.

High brightness 304 stainless steel plate

1. Varity of products: The main stainless steel materials that we deal with are 201, 304, 304L, 316, 316L, 321, 410, 420, 430, etc. 2. Superior quality and adequate ...

304 Stainless Steel Thickness Chart

Stainless Steel Gauge Conversion Chart. The decimal equivalents for sheet metal gauges are listed in the chart below. Please note that ASTM allows coil, sheet and strip thickness to vary from the nominal You will find that our inventory of 304 and 316L stainless steel is extensive.

Stainless Steel Plate - 304, 304L, 316, 316L, 310 and more ...

Penn Stainless Products is a supplier and processer of stainless steel plate in over 30 grades, including 304/L,316/L,309/S, 310/S, duplex, 330 and many more.

201 304 Stainless Steel Plate, 201 304 Stainless Steel ...

Alibaba offers 47,826 201 304 stainless steel plate products. About 86% of these are stainless steel sheets, 1% are dishes & plates, and 1% are dinnerware sets. A wide variety of 201 304 stainless steel plate options are available to you, such as aisi, astm, and jis.

MetalsDepot® - 304 Stainless Plate | Buy Stainless Plate ...

304 Stainless Steel Plate, is the most popular and economical of the stainless steels. 304 Stainless Plate offers good corrosion resistance to many chemicals as well as industrial atmospheres and marine environments. 304 Stainless Plate may become slightly magnetic when worked and is not heat treatable.California Residents: See Prop 65 Warning ...

304 and 316 Stainless Steel Sheet & Plate

304 Stainless Steel Sheet & Plate Stainless steel sheet and plate 304 is the ideal choice due to its tensile strength, high resistance to rust, and high fabrication ability. Cost-effective and versatile material, 304 sheet is suitable for most applications where durable support and corrosion resistance are required.Location: Sun Valley, 91352, California

Steel Plates Stainless 201, Steel Plates Stainless 201 ...

Alibaba offers 57,606 steel plates stainless 201 products. About 78% of these are stainless steel sheets, 4% are steel sheets, and 2% are dishes & plates. A wide variety of steel plates stainless 201 options are available to you, such as astm, aisi, and jis.

Stainless Steel Plate Type 304 and Type 316/316L

Stainless steel plate is available in Type 304 and Type 316/316L. Type 316 is a high corresion resistance alloy. Typical uses include marine, chemical, and food service applications.

Alloy 304/304H Austenitic Stainless Steel Plate ...

Alloy 304/304H (UNS S30400/ S30409) is a modification of the most widely utilized "18-8" chromium-nickel austenitic stainless steel. The carbon content is controlled in the range of 0.04-0.10% for increased strength at temperatures above 800°F (427°C).

Nickel 200/201 Nickel Alloy Plate - Sandmeyer Steel

Nickel 200 and 201 plate can also be joined to steel with Nickel Welding Electrode 141 and Nickel Filler Metal 61. In general, Nickel 201 plate can be welded by the same procedures as Nickel 200 plate with one exception. The oxyacetylene process cannot be used for Nickel 201 plate.

Experienced supplier of stainless steel coil China ...

Wuxi Sino Yuan Science and Technology Co.,Ltd is one of the toppest stainless steel coil China,stainless steel sheet China,304 stainless steel plate in China.During these years of exporting , Wuxi Sino Yuan Science and Technology Co.,Ltd now has rich

Stainless Steel Sheet - Ryerson

Stainless Steel Sheet Ryerson stocks many varieties of stainless steel sheet including 304, the most popular of the stainless steels. This type of stainless sheet thickness provides excellent corrosion resistance for both industrial and marine applications. Another popular grade is 316, which is used in applications where additional corrosion ...

Stainless Steel Sheet - Ryerson

Stainless Steel Sheet Ryerson stocks many varieties of stainless steel sheet including 304, the most popular of the stainless steels. This type of stainless sheet thickness provides excellent corrosion resistance for both industrial and marine applications. Another popular grade is 316, which is used in applications where additional corrosion ...

High brightness 304 stainless steel plate

1. Varity of products: The main stainless steel materials that we deal with are 201, 304, 304L, 316, 316L, 321, 410, 420, 430, etc. 2. Superior quality and adequate ...

China supplier 201 stainless steel sheet

Wuxi Changhao Special Steel Co., Ltd which is specialize in kinds of stainless steel, carbon steel, galvanized steel material. Our products are very competitive in price & good in quality, and have gained a good reputation among our customers both in domestic market and abroad.

Stainless Steel Sheet/ Plate (201, 304, 316, 430,etc ...

Shanghai Metal Corporation is a trusted Stainless Steel Sheet/ Plate (201, 304, 316, 430,etc) supplier in china, we have extensive inventory of Stainless Steel Sheet/ Plate (201, 304, 316, 430,etc), and other metals in various alloys and tempers.

Alloy 304/304L Austenitic Stainless Steel Plate ...

Alloy 304/304L (UNS S30400/S30403) is the most widely utilized “18-8” chromium-nickel austenitic stainless steel. It is an economical and versatile corrosion resistant alloy suitable for a wide range of general purpose applications. It is common practice for 304L to be dual certified as 304 and 304L.

China 304 Stainless Steel Plate/Coil manufacturer, 201 ...

304 Stainless Steel Plate/Coil, 201 Stainless Steel Plate/Coil manufacturer / supplier in China, offering Nonmagnetic 201 Stainless Steel Plate for Building Material, Steel Products Having Stable Property 201 Steel Sheet, 201 Stainless Steel Sheet Used for Building Material and so on.

8k Mirror Finish 201 304 316 316L Stainless Steel Panels ...

310s Stainless Steel Sheet / 4x8 Stainless Steel Perforated Sheet 0.8 - 80mm Thickness: ... 8k mirror finish stainless steel sheet 201 304 316 316L . Grade. 304 321 316 316L 310S 309S 202 201 430 409L 444 410s 904L 2205 2507 .etc. Standard. ASTM,AISI, ASME ,SUS,JIS,EN,DIN,BS,GB .etc.

Stainless Steel Plates Suppliers,Dealers,Manufacturer in ...

steelplates.in› Stainless Steel Sheets, Plates, CoilsSS 304, SS 304L, SS 316 and SS 316L Stainless Steel Plates are the most popular and economical grades of stainless steels. Stainless steel 304/304L plates and stainless steel 316/316L plates, along with Duplex stainless steel plates offer good corrosion resistance to many chemical environments as well as marine and industrial exposures.

304, 316L Stainless Steel Chequered Plate. Stainless Steel ...

steelplates.in› Steel SheetsStainless Steel Chequered Plate / Floor Plate / Tear Plate Manufacturers & Suppliers. Buy SS 304 Checkered Plates, SS 316L Checkered Plates with Best Quality and Most Competitive Prices. SS Checkered Sheets/Plates Stockholder from 3mm to 10mm. Stockist & Suppliers of Stainless Steel 304/304L, 316/316L Checker Plates.

Stainless Steel Plate Type 304 and Type 316/316L

Stainless steel plate is available in Type 304 and Type 316/316L. Type 316 is a high corresion resistance alloy. Typical uses include marine, chemical, and food service applications.

ASTM 201/304/304L/316L Stainless Steel Plate with 5.0 ...

Stainless Steel Sheet, Stainless Steel Plate, Stainless Steel Coil manufacturer / supplier in China, offering ASTM 201/304/304L/316L Stainless Steel Plate with 5.0 Thickness in Stock, ASTM Stainless Steel Seamless Pipe/Tube with Bright Mirror Polished Finish, Corrosion Resistance Super Duplex Stainless Steel 2507 Perforated Metal Sheet Plate and so on.

Stainless Steel Plate - Product Stocking and Processing ...

Coil plate is commonly stocked in dual certified grade, i.e. 304/304L and 316/316L. Stainless steel quarto plate products - ASTM A240M Another method of producing stainless steel plate within and beyond the thickness range of coil production is from a slab of steel that is rolled in the flat condition to a specified length, width and thickness.

Stainless Steel Sheet - Ryerson

Stainless Steel Sheet (267 Items) Show Filters Hide filters ... 304SH12X48X96X4 Stainless Sheet 304 #4 LZR FLM 12GA Thick 48.0000 " Wide X 96.0000 " Long ... 201SH20X60X120X4 Stainless Sheet 201 #4 B/W FLM 20GA Thick 60.0000 " Wide X 120.0000 " Long[PDF]

Stainless Steel - Alro Steel

Stainless Steel 201 alloy is a high performance austenitic stainless steel formulated to have a lower and more stable cost due to the substitution of manganese for a portion of the nickel used in 300 series stainless steels such as Type 304. In addition, the chemical composition of alloy 201 provides higher annealed mechanical

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.