Tel: +86-371-86151827

sa517 grade q steel plate specification

Steel grade:sa517 grade q steel plate specification

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sa517 grade q steel plate specification Introduction

ASME SA517 Grade Q|SA517 Gr.Q STEEL PLATE__Steel Supplier

ASME SA517 standard specification for pressure vessel plates, alloy steel, high-strength, quenched and tempered. ... Gangsteel is specialized in supplying ASME SA517 steel plate in SA517 grade Q. For more information of SA517 grade Q steel plates, please check them in following:

SA517 Grade F steel plate specification - pressure vessel ...

We will give you the SA517 Grade F steel plate specification, pressure vessel steel plate grades plate competitive price, SA517 Grade F steel plate specification, pressure vessel steel plate grades plate good quality and best service from us. Mechanical Properties.

SA-517-High Yield Strength, Quenched ... - Alloy steel

aasteel› Products/Industries› PVQ Carbon & Alloya Applied to both heat and product analysis b May be substituted for part or all of titanium content on a one for one basis. c Zirconium may be replaced by cerium. When cerium is added, the cerium/sulfur ratio should be approximately 1.5 to 1, based on heat analysis. Tensile Requirements

SA517 GRADE Q steel plate supplier - Stainless Profile

SA517 GRADE Q steel plate supplier . Qfsteels produce and export SA517 GRADE Q steel plate Boiler steel plate. We sell SA517 GRADE Q steel plate Low alloy and high strength steel plate, heavy plate and wide and heavy plate, Which is a large steel plate supplier mill at Qfsteels Group.. Keywords: SA517 GRADE Q,ASME SA517 GRADE Q,SA517 GRADE Q Steel Plate,SA517 GRADE Q HIC,SA517 GRADE Q …

ASTM A517 Grade B F Steel Properties/ASME SA517

We are a professional ASME SA517 and ASTM A517 steel stockist and supplier. We can supply different product type and grades of ASME SA517 . If you have any need of ASME SA517 steel please do not hesitate to contact us . ASME SA517 ASTM A517 ASME SA517 Grade B ASME SA517 Grade F ASME SA517 Grade Q ASME SA517 Grade H ASTM A517 Grade B ASTM A517 ...

ASTM A517 - SSAB - SSAB high-strength steel - sheet, plate ...

ASTM A517. The ASTM A517 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered material used in the application of fusion welded boilers and pressure vessels. Under this specification, the plate thickness determines the grade selection and the mechanical properties.

A517 Grade A|B|E|F|H|P|Q|S quenched and tempered alloy ...

Adopt Standard: ASTM A 517/A517M Grade: SA517 Grade A | SA517 grade B | SA517 grade E | SA517 grade F | SA517 grade H | SA517 grade P | SA517 grade Q | SA517 grade S Application: SA517 specification covers high strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. The maximum thickness of plate: grade A and grade B 32mm, Grade …

SA517 Grade F material - pressure vessel steel plate grades

tank steel plate sa517, steel plate sa517 grade b, astm a517 grade q steel plate, low alloy steel plate grade p, boiler steel plate. The material thickness affects the mechanical properties. For instance, A514 rolled to 2.5 inch, or less must have 110-KSI to 130-KSI tensile strength, 100-KSI minimum yield strength, and 18 percent elongation

SA517 Gr.Q steel grade size-BBN STEEL sale steel A285 ...

SA517GrQ,SA517 Grade Q,SA517Gr.Q STEEL PLATE. SA517GrQ,SA517 Grade Q,SA517Gr.Q STEEL PLATE Unitedsteel Mill produces SA517 Super thickness plate, ASME SA517 standard specification for pressure vessel plates, alloy steel, high-strength, quenched and tempered. The steel shall be killed and shall co. A517 GrH,A517 GrP,A517 GrQ,A517 GrS High ...

ASME SA517 Grade Q,SA517GrQ steel plate--Xin Steel ...

Quenched and tempered alloy steel plate SA517 Grade Q belongs to high yield and tensile strength steel plate.Rolling steel grade SA517GrQ furnished under ASME SA517/SA517M shall conform to the requirements of the current edition of specification SA 20/SA 20M,for the ordered materials of steel SA517 Gr.Q,unless a conflict exists in which case ...

ASME SA517 Grade A prime quality pressure vessel plate ...

ASME SA387 Grade 22 pressure vessel plate specification; SA203 Grade E cheap pressure vessel plate supplier; ... Pressure Vessel Steel plate ,ASME SA517 Grade A ...Henan HZZ offers a large selection of high quality ASME SA387 grade 5 class 2 (SA387GR5CL2) pressure vessel and boiler steel plate with charpy impact test. Having been focused on ...

sa517 steel - pressure vessel steel plate grades

a517 grade q steel plate, low alloy steel plate, high strength steel plate sa517 grq,steel plate sa517 grade q, steel plate price. ASTM A514/A514M-05 ASTM A514 standard specification covers high strength , quenched and tempered steel plates, is a specification for 100 KSI yield strength, quenched and tempered steel intended for structural

A517 Grade A|B|E|F|H|P|Q|S quenched and tempered alloy ...

Adopt Standard: ASTM A 517/A517M Grade: SA517 Grade A | SA517 grade B | SA517 grade E | SA517 grade F | SA517 grade H | SA517 grade P | SA517 grade Q | SA517 grade S Application: SA517 specification covers high strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. The maximum thickness of plate: grade A and grade B 32mm, Grade …

ASME SA517 Grade Q steel material price-BBN STEEL sale ...

They are : Grade A, grade B, grade E, grade F, grade. SA517 GRADE Q MR0175,SA517 GRADE Q Steel,SA517 GRADE Q … Gangsteel Bolier Plate Factory are specialized in producing and exporting ASME SA517/SA517M SA517 GRADE Q NACE MR0175, MR0103 Boiler steel plate, Low alloy and high strength steel plate ... We can supply ASME SA517 GRADE Q steel ...

ASME SA517/ SA517M Grade E Pressure Vessel Steel Plate

TJC Steel( owned by TJC Iron&Steel (Group) Co., Limited) is the most competitive manufacture and supplier of ASME SA517/ SA517M Grade E Pressure Vessel Steel Plate in China. For more details, please contact us freely. Click Here to See PDF Details for ASME SA517/ SA517M Grade E Pressure Vessel Steel Plate

A517 Grade Q Boiler and Pressure Vessel Steel in Angola

ASME SA517Gr.Q quenched and tempered steel plates . SA517 Grade Q is a high strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. The maximum thickness of plate, grade A and grade B are 32mm Grade H and grade S are 50mm grade P is 100mm Grade F, is 65mm Grade E and grade Q are ...

ASTM A517 - SSAB

The ASTM A517 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered material used in the application of fusion welded boilers and pressure vessels. Under this specification, the plate thickness determines the grade selection and the mechanical properties.

ASME SA517 Grade E|SA517 Gr.E STEEL PLATE__Steel …

ASME SA517 standard specification for pressure vessel plates, alloy steel, high-strength, quenched and tempered. ... Gangsteel is specialized in supplying ASME SA517 steel plate in SA517 grade Q,SA203 Grade B,SA204 Grade B, SA30. ASME SA517 Grade S|SA517 Gr.S S.[PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 4 ASTM Specifications continued SPECIFICATION A204 Grade A A204 Grade B A204 Grade C A242†s Type 1** Type of Steel Alloy Alloy Alloy Carbon Requirements for Delivery A20 A20 A20 A6 Tensile Strength (ksi) 65/85 70/90 75/95 70 Min. to ¾" incl.; 67 Min. over ¾-1½" incl.;

Standard Specification for Pressure Vessel Plates, Alloy ...

A517 / A517M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered Charpy V-Notch impact test~ pressure vessels~ high-strength steel~ steel plates~

supplier of asme sa517 steel plate suppliers,A36,Q235B ...

Mild Steel Plate Suppliers, Asme Is 2062 Gr.A As the professional Chinese ASME SA517 grade F steel supplier, for Boilers and Pressure Vessel steel, P355N steel plate/sheet for A514 Gr E steel plate ;SA517 Gr.P, SA517 Grade P, SA517 GRP boiler and pressure vessel steel plate Steel SheetsSA517 Gr.Q,SA517 Gr.Q,SA517 Gr.Q,steel plate.

supplier of SA517 Grade A application,A36,Q235B,Q345B ...

ASME SA517 Grade F high tensile alloy steel plates,ASME . ASME SA517 Grade F in the standard SA517/SA517M is a kind of high tensile alloy steel plates material used to fabric high temperature pressure vessels. ASME SA517 have six grades or levels. They are : Grade A, Grade F, grade E, grade F, grade …

ASME SA517Gr.Q quenched and tempered steel plates

Related keywords: ASME SA517Gr.Q, ASME SA517 Grade Q, ASME SA517GrQ, ASME SA517 Gr.Q. Adopt Standard: ASME SA517 . SA517 Grade Q steel plate SA517 Grade Q is a high strength quenched and tempered alloy steel plates intended for use in fusion welded boilers and other pressure vessels. The maximum thickness of plate,

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.