Tel: +86-371-86151827

high strength carbon steel plate sheet steels

Steel grade:high strength carbon steel plate sheet steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

high strength carbon steel plate sheet steels Introduction

High Strength Carbon and Low Alloy Steels | ispatguru

Fig 1 Classification of high strength carbon and low alloy steels. The four types of high strength steels have some basic differences in mechanical properties and available product forms. In terms of mechanical properties, the heat treated low alloy steels offer the best combination of strength …[PDF]

High-Strength Low-Alloy Steels - ASM International

High-strength low-alloy (HSLA) steels, or microalloyed steels, are ... The HSLA steels in sheet or plate form have low carbon content (0.05 to −0.25% C) in order to produce adequate formability and weldability, and ... High-Strength Low-Alloy Steels / 195 Table 1 Compositional limits for HSLA steel grades described in ASTM specifications

High Strength Low Alloy (HSLA) Structural Steel Plate ...

leecosteel› Steel Plate ProductsHigh Strength Low Alloy or (HSLA) steel plate, is stronger and tougher than carbon steel and is ductile, highly formable and weldable. Our HSLA steel plates are used in a variety of industries including construction, military, and more. We offer various thicknesses, lengths, and widths to meet your specifications. Request a quote today![PDF]

Steel Plate & Sheet - alro

Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis* ASTM A-36 Carbon (C) max % 0.25 0.25 0.26 0.27 0.29

High Strength Low Alloy Steel Plate - INFRA-METALS

The atmospheric corrosion resistance of this steel in most environments is substantially better than that of carbon steels with or without copper addition. ASTM A514 – Standard specification for high-yield-strength, quenched and tempered alloy steel plate, suitable for welding.

Buy High Strength Low Alloy Plate From Top Steel Supplier ...

15 MNVN is mainly used as medium strength steel plate. It is featured with high strength and toughness, good weldability and low temperature toughness and is widely used in the manufacture of Bridges, boilers, ships and other large structures. Strength level is above 500 Mpa, low carbon alloy steel plate is not able to meet the requirements ...

The Four Types of Steel | Metal Supermarkets

Medium Carbon Steel: Typically has a carbon range of 0.31% to 0.60%, and a manganese content ranging from .060% to 1.65%. This product is stronger than low carbon steel, and it is more difficult to form, weld and cut. Medium carbon steels are quite often hardened and tempered using heat treatment. High Carbon Steel: Commonly known as “carbon ...

4140 Steel | 4150 Steel | B7 | Associated Steel Corporation

High Strength, Fatigue Resistant Alloys & Carbon Steels At Associated Steel, we pride ourselves on offering an in-depth selection of alloy and carbon steels. These materials include hot roll heat treated, cold finished annealed, turned ground and polished, heat treated hollow stock, induction hardened linear shafting, pre-keyed shafting ...

HIGH STRENGTH - Standards - ASTM Standards

"Standard Specification for High-yield-strength, quenched and tempered alloy steel plate, suitable for welding" This standard applies to quenched and tempered steel plate in thicknesses of 6" and under and sets out requirements that govern tensile strength, yield strength, hardness, chemical composition and acceptable heat treatment parameters.

High Strength Low Alloy Steel Plate - INFRA-METALS

The atmospheric corrosion resistance of this steel in most environments is substantially better than that of carbon steels with or without copper addition. ASTM A514 – Standard specification for high-yield-strength, quenched and tempered alloy steel plate, suitable for welding.

High Strength Low Alloy Steel Sheet - ansonsteels

High Strength Low Alloy Steel Sheets for Sale High Strength Low Alloy Steel Sheet High-strength low-alloy (HSLA) steels are designed to provide better mechanical properties and greater resistance to atmospheric corrosion than conventional carbon steels.

Carbon High Strength & High Tensile Steel Plates & Sheets ...

Clients can profit these Carbon High Strength & High Tensile Steel Plates and Sheets from us in different sizes, measurements, evaluations and particular to suit the definite prerequisite of the customers. Specification

HIGH STRENGTH - Standards - ASTM Standards

"Standard Specification for High-yield-strength, quenched and tempered alloy steel plate, suitable for welding" This standard applies to quenched and tempered steel plate in thicknesses of 6" and under and sets out requirements that govern tensile strength, yield strength, hardness, chemical composition and acceptable heat treatment parameters.

High Strength Steels - Associated Steel

This steel shaft offers both a high degree of machinability, like a carbon steel, but has the strength consistent with an alloy steel. It does not exhibit hard and/or soft spots similar to what is seen in most carbon steels. It is designed for ease of machining with high speed automatic equipment, such as …

Plates | Carbon Steel | Throop, PA - Nivert Metal

Steel Plate. ASTMA242-A58 8-A572. Sheard-flame cut . High strength, low alloy (HSLA) steels are basically low carbon steels to which have been added small amounts of such alloying elements, such as chromium, nickel, molybdenum, vanadium, zirconium, copper, and columbium.

Carbon High Strength Steel Plate - w3s.in

High Strength Low Alloy Steel Plate - INFRA-METALSThe atmospheric corrosion resistance of this steel in most environments is substantially better than that of carbon steels with or without copper addition. ASTM A514 – Standard specification for high-yield-strength, quenched and tempered alloy steel plate, suitable for welding.

high strength steel sheet ASTM A724 Grade B

High Strength Low Alloy Steel - Heat Treated Construction - EMJ. High strength low alloy (HSLA) steels are essentially low carbon steels to which Specifications: ASTM A 572 Grade 50 (Plates) . B & c Up to 11/4” incl. ASTM A645-A724 Steels - WeldReality. 344-551, high strength improved formability plate. A662-B, 40 In many cases the ...[PDF]

High carbon and quenchable steels - ArcelorMittal …

High carbon steel is generally supplied in the as rolled condition to analysis only. After processing (e.g. blanking, forming or shaping), the high carbon steel is generally heat treated to obtain the desired mechanical properties. In certain applications high carbon steels are used in the as rolled condition on account of the cost saving this ...

Steel Sheet Plate | Industrial Metal Supply | Industrial ...

Hot rolled sheet and plate provides a rougher surface than cold rolled steel and plate. When galvanized it is also regularly used in applications where corrosion resistance is a necessity. High strength and highly formable hot rolled sheet and plate is also easy to drill, form and weld.

Carbon Steel, High-Strength-Low Alloy, Stainless Steel ...

Hot Rolled High Strength Low Alloy Sheet: A Hot Rolled Sheet which offers a much higher Yield Strength and more corrosion resistance than a Hot Rolled Commercial Quality Sheet. These sheets are two to four time more corrosive resistant than low carbon steel sheets and offer a Yield Strength …

MetalsDepot® - High Strength Steel Plate - Buy Online!

Shop Online for - Impact Resistance A514, T1 steel plate, Pressure Vessel Quality A516 steel plate, High Strength A572 steel plate, A588 Corten weathering steel plate, Abrasive Resisting AR400 steel plate, and Military Grade 46100 Armor Plate. Metals Depot's High Strength steel plates are ideal for a wide range of structural projects, machinery ...

High Strength Steel Manufacturers | IQS Directory

businessIndustry Information. High Strength Steel. High strength steel is the term given to steels that exhibit extremely high qualities of strength and corrosion resistance. Every steel variety’s properties depend on the ratio of iron to alloying materials, usually carbon, as well as other additives.Also, a steel’s physical properties can be changed by metal treatment processes like hot ...[PDF]

High Strength Steels - automotive.arcelormittal

High strength steels are extensively used in automotive body structure where good durability is a requirement. ... HFT 340 PLUS Vacuum degassed ultra-low carbon steel containing Mn, P, Ti and Nb Processing Depending on the grade, these High Strength Steels are produced using vacuum degassed ultra-low-carbon or

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.