Tel: +86-371-86151827

forged carbon steel tube sheet steels

Steel grade:forged carbon steel tube sheet steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

forged carbon steel tube sheet steels Introduction

Difference between forged steel and carbon steel? - Answers

answers› …› Engineering› Mechanical EngineeringDifference between forged steel and carbon steel? ... option for casing and tubing used in oil wells but it is not very resistant to corrosion. ... content which is found mainly in carbon steels ...

Carbon Steel & Alloy Steel Seamless Tubes - aesteiron

B Carbon Steel Pipes | Pipe Fittings manufacturers, have wide range of Seamless Carbon Steel Pipes & Tubes | Carbon Steel SAW Pipes & Tubes | EFW Carbon Steel Pipes | Saw Carbon Steel Pipes ... Sheet; Pipe, Tube & Tubing; Buttweld Fitting; Forged Fitting; Olets Pipe Fittings; Flanges; Fastener; Rod & Round Bar; ... 2014 Aesteiron Steels LLP ...

Carbon Steel Forgings - Forged Carbon Steel | AM&FG

Carbon Steel Alloys. Carbon steel is available in grades from C1006 up to C1095, with the carbon increasing from 0.06% to 0.95%. The range of both carbon and manganese contents in carbon steels allows for development of a very wide range of strength, toughness and wear resistance values.

Forging Products & Parts Manufacturer - CHW Forge

Forging Products & Parts Manufacturer. CHW Forge manufactures a wide range of steel forging products which find application across diverse industries. Forgings from the company are helping run some of the most valuable companies across the world today.

304, 309, 316, 316l, stainless steel, carbon steel, Alloy ...

World Class manufacturer Of Stainless & Carbon Steels . Bhandari Metal & Tubes is compelling may be the outstanding supplier alongside manufacturer associated with various Stainless Steel Pipes, Pipe Fittings alongside Flanges inside AISI: 304, 304L, 321, 316, 316L, 310, 317, 317L & 904L and so on.

4320H - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 4320H can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Invar 36 Seamless Rolled Rings, Titanium tube sheets, F53 ...

Invar 36 Seamless rolled rings, forged Titanium tube sheets, Open Die Forgings, large diameter rolled rings and tube sheets in ASTM / ASME and AISI material grades. Stainless, alloy and carbon steels, forged pieces according to drawings.[PDF]

Carbon Steel Handbook - OLI Systems

weldability, carbon steel is one of the most commonly used materials in the electric power generation industry. Carbon steels in which carbon represents 0.15–0.35%—those used most often as boiler and piping materials—are the focus of this Carbon Steel Handbook. Although carbon steel is available in virtually all product forms, it is the

Steel Standards - ASTM International

ASTM's steel standards are instrumental in classifying, evaluating, and specifying the material, chemical, mechanical, and metallurgical properties of the different types of steels, which are primarily used in the production of mechanical components, industrial parts, and construction elements, as well as other accessories related to them.

Stainless Steel Forged Fittings Manufacturer,Mild Steel ...

SUPREME STEEL & ENGINEERING CO. - We have gained eminent position in the industry as manufacturer and supplier of high grade of Stainless Steel Forged Fittings,Mild Steel Pipe Fittings for several purpose.Based in Mumbai,India.

Wrought Carbon Steel Forgings - What is Wrought Steel ...

Wrought Carbon Steel. Carbon steel, also called plain carbon steel, is a malleable, iron-based metal containing carbon, small amounts of manganese, and other elements that are inherently present. Steels can either be cast to shape or wrought into various mill forms from which finished parts are formed, machined, forged, stamped, or otherwise ...

Carbon Steel WPBW Buttweld Pipe Fittings | ASTM A234 ...

We are a top dealer and exporter of WPBW Carbon Steel Buttweld Fittings, A234 WPBW Buttweld Pipe Fittings, Carbon Steel WPBW Elbow, Carbon Steel WPBW Pipe Reducer, Carbon Steel WPBW Cross, Carbon Steel WPBW Tee and many more.Material: CS, AS,SS

347H forged discs and Titanium tube sheets, SA182 F304 ...

347H forged discs and Titanium tube sheets for heat exchangers SA182 F304, F316, F321, fully machined and drilled, in ASTM/ASME stainless, alloy and carbon steel grades. Blinds, channel covers, compressor discs. Forgings in pre- and finished machined condition.

Carbon Steel WPBW Buttweld Pipe Fittings | ASTM A234 ...

We are a top dealer and exporter of WPBW Carbon Steel Buttweld Fittings, A234 WPBW Buttweld Pipe Fittings, Carbon Steel WPBW Elbow, Carbon Steel WPBW Pipe Reducer, Carbon Steel WPBW Cross, Carbon Steel WPBW Tee and many more.

forged carbon steel tube sheet - w3s.in

carbon steel tube sheet - Alibaba. A wide variety of carbon steel tube sheet options are available to you, such as ansi, din, and iso. You can also choose from carbon steel, alloy steel, and stainless steel. As well as from free samples, paid samples. There are 18,833 carbon steel tube sheet suppliers, mainly located in Asia. Learn more

Carbon Steel Product - Carbon Steel Sheet Manufacturer ...

Manufacturer of Carbon Steel Product - Carbon Steel Sheet, CS IS 2062 Sheet, CS API 5L Seamless Pipe and CS ASTM 106 ERW Pipe offered by Amanat Steels Private Limited, Mumbai, Maharashtra.

Carbon Steel Butt Weld Fittings, Carbon Steel Forged ...

Rajendra Metals Supply Corporation - Exporter and manufacturer of butt weld fittings, stainless steel butt weld fittings, carbon steel butt weld fittings, alloy steel butt weld fittings, copper alloy butt weld fittings, duplex steel butt weld fitting, stainless steel pipes, carbon steel pipes, stainless steel pipe fittings, carbon steel fitting, pipe fittings like elbows, flanges, tees, nipple ...

Stainless Steel (ss), Carbon Steel (cs), Alloy Steel (As ...

Stainless Steel (ss), Carbon Steel (cs), Alloy Steel (As), Hastelloy, Tantalum, Nickel, mild Steel (ms) Pipe, Tube, Ibr, ERW, Rectangular, Polish, Cast Iron ...

Forged Alloy Steels | Products & Suppliers | Engineering360

globalspec› PRODUCTS & SERVICESFind Forged Alloy Steels related suppliers, manufacturers, products and specifications on GlobalSpec - a trusted source of Forged Alloy Steels information. ... Pipe Flanges - Carbon Steel Forged Raised Face Threaded Flanges 150# ... forged tube sheet - offers from forged tube sheet manufacturers, suppliers, exporters & wholesalers [ Related ...

Stainless Steel (ss), Carbon Steel (cs), Alloy Steel (As ...

Korus Steels has been a professionally managed importers, exporters, stockiest and supplier of ferrous and non-ferrous metals since last two decades.We are capable of providing a vast range of materials, from stock, to suit your needs. From highly specialized non-standard material to off the shelf items, from production to prototype, from low minimums to mill runs, Korus Steels has the ...

Aesteiron Steels LLP | Steel Plate Distributors

Carbon Steel, Alloy & Stainless Steel Plate Distributor. The Aesteiron Steels has drawn together under the one roof of the total spectrum of trading, stockholding and processing activities in Stainless Steel, Super Duplex Steel UNS S32750 Pipe & Tubes, Super Duplex Steel UNS S32760 Pipe & Tubes, Super Duplex Steel UNS S32950 Pipes & Tubes ...

Carbon Steel | Machine Design

Carbon steel, also called plain carbon steel, ... "B" indicates a boron steel. Cast-carbon steels are usually specified by grade, such as A, B, or C. ... but the technique was first used in sheet ...[PDF]

FORGED CARBON STEEL FITTINGS - Merit Brass

FORGED CARBON STEEL FITTINGS 3000 LB SOCKET WELD. FORGED CARBON STEEL FITTINGS 2000 LB THREADED PART NO. ... Every precaution has been taken in preparing these list price sheets. Merit Brass Company cannot be held responsible for omissions or typographical errors.

Sheet | Liebovich Steel & Aluminum Company

Offers a combination of increased strength, corrosion resistance, and machine-ability making it widely used. Sheet is heat treatable, resists cracking due to stress, is easy to weld and machine, but limited on formability. Sheet is ideal for structural framing, base plates, gussets, motorcycle & automotive parts, etc.

Low-Carbon Steels 1005 - 1008 Forgings | All Metals ...

Low-Carbon Steels 1005-1008 General Characteristics. These are low-carbon steels that may be used in many forms, from deep drawing flat-rolled products up through forgings. Because of their inherent lack of strength they would on occasion be used in the carburized condition.

Stainless Steel Pipes & Tubes, Nickel Alloy Pipe Fittings ...

We are one of the leading manufacturer, stockists and exporters of stainless steel sheets & plates, SS pipes & tubes, alloy steel flanges, carbon steel forged fittings, copper nickel buttweld fittings, steel ferrule fittings, nickel round bars, rods, & fasteners supplier etc.

Steel Distributor, Steel Manufacturer, Stainless Steel ...

Consisting of 8 dynamic Business Units and operating from a strategic network of more than 50 service centres, branches and warehouses, Macsteel supplies the entire Sub-Saharan geographic region with the broadest range of carbon steel, stainless steel, speciality steels, aluminium products and value added processes to all industry sectors.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.